Test on Workplace Safety Procedures and Regulations
Workplace Safety Procedures and Regulations: A Student Guide
Test: Workplace Safety Procedures
20 questions
Question 1: A permit is required before one is allowed to start welding in certain areas such as confined spaces.
A. Ano
B. Ne
Explanation: The study materials explicitly state, "Also remember that in certain areas such as confined spaces, you need a permit before you are allowed to start welding."
Question 2: The study materials indicate that a permit is required to enter any confined space.
A. Ano
B. Ne
Explanation: The study materials state that standard lock-out and blanking-off procedures apply to confined-space entry, and that a permit is needed to start welding in confined spaces, but they do not explicitly state that a permit is required solely for entering any confined space.
Question 3: Is it acceptable to leave tools unsecured on a scaffold or platform while working aloft, provided there are no employees working directly below?
A. Ano
B. Ne
Explanation: Any tools must be safely stored when working aloft, regardless of whether employees are working directly below.
Question 4: After a lockout, before starting equipment again, it is only necessary to check that the equipment itself is safe to use.
A. Ano
B. Ne
Explanation: After a lockout, before starting equipment again, it is necessary to check both that the equipment is safe to use AND that other people are clear of the equipment.
Question 5: Working at a height higher than 2 meters above ground level mandates the use of a safety belt and a lifeline.
A. Ano
B. Ne
Explanation: The study materials specify that if an employee is working at a height higher than 2 meters above ground level, they are required to wear a safety belt and a lifeline. The only exception mentioned is for enclosed platforms where there is no risk of falling.