Test on Aviation Communication and Air Traffic Services
Aviation Communication and Air Traffic Services
Test: Surveillance Systems, Flight Operations, Aviation Communication: Procedures & Flight Info, Air Traffic Control Operations, Miscellaneous, Air Traffic Control Procedures, Aviation Communication: Radio Systems & Controls, Avionics & Signals, Airport Procedures, Emergencies & Safety
20 questions
Question 1: During arrival procedures, pilots should contact approach control while still outside of Class B or Class C airspace.
A. Yes
B. No
Explanation: The study materials state: 'Listen to ATIS and then contact approach control while still outside of Class B or Class C airspace.'
Question 2: According to the provided study materials, which of the following actions are pilots expected to take when operating at an airport with a UNICOM?
A. Make an initial call when 10 miles from the airport, requesting wind and runway information.
B. Report when entering the downwind, base, and final legs of the traffic pattern.
C. Contact the UNICOM prior to taxi, requesting wind and traffic information.
D. Monitor the CTAF during taxi, departure, and until 10 miles from the airport.
Explanation: The study materials state that pilots should 'Make your initial call when you are 10 miles from the airport' and give an example requesting 'wind and runway information'. It also specifies to 'Report when you enter the downwind, base, and final legs of the traffic pattern and when exiting the runway'. For taxi, it instructs to 'Contact the UNICOM prior to taxi' and gives an example requesting 'wind and traffic information'. Lastly, it states to 'Monitor the CTAF during taxi, departure, and until you are 10 miles from the airport'.
Question 3: The primary purpose of the Common Traffic Advisory Frequency (CTAF) is to provide direct communication with air traffic controllers at busy terminal areas for flight plan clearances.
A. Yes
B. No
Explanation: The Common Traffic Advisory Frequency (CTAF) is used to increase safety at airports without operating control towers or when the tower is closed. It allows radio-equipped aircraft to transmit and receive traffic information, broadcast position and intentions, and receive airport advisories.
Question 4: According to the provided materials, which statement accurately describes U.S. aircraft registration numbers?
A. They are typically a combination of five letters and numbers and are painted on the inside of the aircraft.
B. All U.S.-registered aircraft have an N preceding the number, which is why they are sometimes called N-numbers.
C. They are only composed of letters to avoid confusion with spoken numbers.
D. The N prefix of the registration must always be stated during initial callups to ATC.
Explanation: The study materials state that all U.S.-registered aircraft have an N preceding the number, which leads to them being referred to as the N-number. The numbers are painted on the outside, not the inside, and are usually a combination of five letters and numbers, not just letters. The N prefix may be dropped if the manufacturer's name or model is stated during initial callups.
Question 5: When speaking into the microphone, it is best to speak loudly to ensure your transmission is heard clearly.
A. Yes
B. No
Explanation: The study materials state, "speak into it in a normal, conversational tone," not loudly.